ET-536A series：SMD Power Inductors.

• Unshielded drum core .
• Height：5.46m/m Max ( 5.97m/m Max for 1.0~10uH )
  ( 5.72m/m Max for 15 ~ 100uH ).
  
• Footprint： 9.91x13.21m/m Max.
• Current rating： Up to 10A.
• Inductance range： 1.0uH to 2.2mH.
  

ET-529 series: SMD Shielded Power Inductors.

• High inductance. High DC current capability.
• True surface mount design.
• Tape & Reel packaging standard, 3000pcs per 13" Reel.
• Magnetically shielded.
• RoHS compliant component.

ET-49160 seriess： Gate Drive Transformers for EP Type.

• Operating Temperature from -40 to 130.
• Manufactured to UL recognized 155 insulation sysem.
• Materials meet flammability requirements for UL 94V-0.

ET-52300A series：AC Line Filters EMI/RFI
Common Mode Choke ( SMD Type ).

• Prevents noise emission, such as electromagnetic interference (EMI) & radio frequency interference (RFI).
• Protects AC side from the effects of switching regulators.
• Wide range of available inductances and current ratings.

ET-52600 series： Surface mount common mode choke.

• Mechanical configuration A flat top surface mount case with excellent coplanarity of terminals.
• Operating temperature Range 0 to +150.
• Withstanding voltage： 500VAC.
• Rated RMS current based upon 40 temperature rise from 25 ambient.
• Maximum power dissipation at 25 0.605 watts.

ET-52700 series： Common mode choke for DC line.

• Idea for dc line and countermeasure against radiation noise.
• Low height and small size SMD.
• Excellent frequency characteristics.

ET-52800 series： Noise countermeasures common mode choke

• Use new material for higher impedance under high frequency range noise suppression.
• This series employs two outer magnetic path limbs design with windings on the center magnetic path limb of double-square shaped closed magnetic circuit ferrite core to reduce leakage flux.
• Wide range of available inductances and current ratings.

ET-52900 series： High Current Inductor

• Highest inductance with a low number of turns.
• Lowest DCR, Lower loss.
• Winding to winding isolation 3000 Vrms for 1 sec.
• Turn ratio 1 : 1 : 1.

ET-53000 series： High Current Inductor

• Ideal for audio playing systems.
• Larger ferrite drum can attain a higher Q than other typical SMD coils.
• This will result in larger inductances, maintain high magnetic saturation for large signals and maintain low distortion of signals.
• This type also has electromagnetic shielding for low ENI.
• Base can accommodate up to two internal capacitors.
• Reflows at 235 ~ 245 ( 5-10 secs max ).

ET-72300C series： SMD Current Sense Transformer

• Low profile - height 4.1 mm max.
• Designed for automatic pick and place.
• Operating frequency range 10KHz to 1MHz.
• Primary rated for 20 Amps AC ms max.
• Special design av ailable on customer request.