Features
Purpose

 
20 ~ 55
Rigid mount termination and stand-off. General Purpose Inductor
  Base material meets flammability requirements
    requirements of UL94V-0.
  PC Board-automatic insertion applicable.
  SMPS averaging filter.
Characterized for general purpose use and
  ripple filters.
  Single layer designs.
  Can be used as differential mode inductors in
    EMI filters.
  Bare coil low cost version available.
47~100
 Base material meets flammability requirements Inductor
  of UL 94-0.
150~1000
 Designed for general purpose use,switching mode Low Power Inductor
  power converters and ripple filters.
High inductance stability with variable volt-seconds
    & load currents.
  Compact packages with vertical and low profile
  options available.
 
71~400
 130° Cmaximumoperationtemperature. High Current Inductor
Low profile in horizontal package available on
    request.
 
Bare coil available on request.
    Prevents noise emission, such as electromagnetic AC Line Filters
EMI/ RFI
Common Mode Choke
    interference (EMI) & radio frequency interference
    (RFI).
Protects AC side from the effects of switching

 

   regulators.
  Wide range of available inductances and current
  ratings.
    Prevents noise emission, such as electromagnetic AC Line Filters
EMI/ RFI
Common Mode Choke (SMD Type)
      interference (EMI) & radio frequency interference
    (RFI).

 

   Protects AC side from the effects of switching
      regulators.
    Wide range of available inductances and current
      ratings.
    Prevents noise emission, such as electromagnetic AC Line Filters
EMI/ RFI
Common Mode Choke
      interference (EMI) & radio frequency interference
      (RFI).
  Protects AC side from the effects of switching
      regulators.
    Wide range of available inductances and current
    ratings.
    Prevents noise emission, such as electromagnetic AC Line Filters
EMI/ RFI
Common Mode Choke
      interference (EMI) & radio frequency interference
      (RFI).
  Protects AC side from the effects of switching
      regulators.
    Wide range of available inductances and current
    ratings.
      Mechanical configuration A flat top surface mount Surface mount common mode choke.
        case with excellent coplanarity of terminals.
  Operating temperature Range 0 to +150.
    Withstanding voltage： 500VAC.
      Rated RMS current based upon 40 temperature
        rise from 25 ambient.
      Maximum power dissipation at 25 0.605 watts.
      Idea for dc line and countermeasure against Common mode choke for DC line.
    radiation noise.
    Low height and small size SMD.
      Excellent frequency characteristics.
      Use new material for higher impedance under high

Noise
counter-
measures
common
mode choke
        frequency range noise suppression.
      This series employs two outer magnetic path limbs
    design with windings on the center magnetic path
      limb of double-square shaped closed magnetic
        circuit ferrite core to reduce leakage flux.
      Wide range of available inductances and current
        ratings.
      Highest inductance with a low number of turns. High Current Inductor
  Lowest DCR, Lower loss.
    Winding to winding isolation 3000 Vrms for 1 sec.
      Turn ratio 1 : 1 : 1.
   
        Ideal for audio playing systems. High Current Inductor  
        Larger ferrite drum can attain a higher Q than other typical  
          SMD coils.  
    This will result in larger inductances, maintain high  
        magnetic saturation for large signals and maintain low  
          distortion of signals.  
        This type also has electromagnetic shielding for low ENI.  
        Base can accommodate up to two internal capacitors.  
        Reflows at 235 ~ 245 ( 5-10 secs max ).  
   
     
 

 
 
 
Copyright (c) 2008.Elytone Electronic Co., Ltd. All rights reserved.